Q-Logic 59022-03 D manual Adding Zone Members

￿	3 – Managing Fabrics
	Zoning a Fabric

2.Open the Edit menu and select Create a Zone.

3.In the Create a Zone window, enter a name for the new zone, and choose the OK button. The new zone name is displayed in the Zone Sets window.

Note: If you enter the name of a zone that already exists in the database, the SANbox Manager application will create a copy of that zone and its membership in the zone set.

4.To add ports or devices to the zone, do one of the following:

■In the zone set tree, select the zone set. In the graphic window, select the port to add to the zone. Open the Edit menu and select Add Members.

■Select a port by port number, Fibre Channel address, or worldwide name in the Port/Device tree, and drag it into the zone.

■Select a port by port number, Fibre Channel address, or worldwide name in the Port/Device tree. Right-click the zone and select Add Zone Members from the popup menu.

5.Choose the Apply button to save changes to the zoning database.

3.4.7.2

Adding Zone Members

Adding a zone member to a zone will affect every zone set in which that zone is a member. To add member ports/devices to a zone, do one of the following:

■Select a port by port number, Fibre Channel address, or worldwide name in the Port/Device tree, and drag it into the zone. To select and drag multiple ports/devices, press and hold the Control key while dragging.

■Select one or more ports by port number, Fibre Channel address, or worldwide name in the Port/Device tree. Right-click the zone and select Add Zone Members from the popup menu.

Choose the Apply button to save changes to the zoning database.

Note: Domain ID conflicts can result in automatic reassignment of switch domain IDs. These reassignments are not reflected in zones that use domain ID/port number pair to define their membership. Be sure to reconfigure zones that are affected by a domain ID change.

59022-03 D 3-23