1.Load a tape. When the VCR automatically starts playback, press STOP.
2.Press INDEX/M/A SKIP. You see:
MODE
Y
3.Repeatedly press PLAY or STOP to high- light MOVIE ADVANCE, then press FF.
4.Repeatedly press PLAY or STOP to se- lect GO TO START OF MOVIE or GO TO PREVIEW.
NCE
ODE
OF MOV I E
W
Y
GO TO START OF MOVIE — The VCR automatically skips any previews at the beginning of the tape and advances to the start of the movie.
GO TO PREVIEW — The VCR searches for and plays the first preview.
Press INDEX/M/A SKIP to skip to the next preview.
5. Press FF.
USING INDEX SEARCH
Your VCR has the VHS Index Search System. Each time you start recording, the VCR auto- matically marks the tape with an index mark at that location. You can locate the recording you want to play or skip the recording(s) you don’t want to watch by either entering the number of index marks or by scanning. The VCR searches forward or backward from the current location.
Notes:
•Since the VCR does not display the index marks, we recommend you list the record- ings on each tape in order on the tape’s box, to make it easier to locate a particular recording on the tape.
•Index search might not function properly when two or more index marks are close to each other.
•If you do not press any button within 10 seconds after you select INDEX SEARCH, the VCR cancels the index search mode.
•If you activate the direct access index search at a tape position very close to an index mark, the VCR might not count that mark. See “Direct Access Index Search.”
•Recording over an index mark erases that index mark.
Direct Access Index Search
1.Press INDEX/M/A SKIP while the VCR is stopped or playing a tape. You see:
MODE
H
CE
Y
2. Repeatedly press PLAY or STOP to highlight INDEX SEARCH, then press FF. INDEX appears.
30
