Notes:
•You cannot use random play to play a programmed sequence.
•You can repeat or search through programmed tracks. To repeat the programmed sequence, see “Repeat Play” on Page 14.
7.Programmed play automatically stops at the end of the last pro- grammed track. To stop the CD/ CDG player at any time during pro- grammed play, press STOP. The CD/ CDG’s total number of tracks and playing time appear.
Reviewing/Replacing a
Programmed Sequence
While play is stopped, repeatedly press MEMORY to review the programmed se- quence.
To replace a programmed track, press MEMORY until the position number of the track you want to replace appears. Then repeat Steps 3 and 4 to select and store the new track.
Erasing a Programmed
Sequence
You can do any of the following to erase a programmed sequence:
•Press STOP and MEMORY at the same time when the CD/CDG player stops.
•Press OPEN/CLOSE before or after programmed play.
16
•Set FUNCTION SELECTOR to TAPE and then back to CD.
CD/CDG CARE TIPS
Although a CD/CDG is very durable, you should handle it with care. We recom- mend the following precautions:
•Keep the CD/CDG in its protective case or sleeve when you are not playing it.
•Keep the CD/CDG clean. Your local RadioShack store sells a suitable CD cleaner kit.
•Do not write on either side of the CD/CDG, particularly the
•Do not store CD/CDGs in
•Keep CD/CDGs dry. A water drop can act as a lens and affect the laser beam’s focus.
•Always handle a CD/CDG by the edges to avoid fingerprints. Finger- prints and scratches on the CD/ CDG’s surface can prevent the laser beam from correctly reading the dig- ital information.
•If a CD/CDG skips during play, it might be scratched. Your local RadioShack store sells a Scratch’n Fix kit (Cat. No.
