Optimus S3000 Error Messages

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

	Display	Problem		Solution	A
	O(blinks)	Clock not set.	Set date and time.		129
	B	Battery running low.	Prepare to charge or replace		12, 14
			battery.
	N	Battery exhausted.	Charge or replace battery.		12, 14
	Battery exhausted.
			Turn off camera, and allow
			battery to cool down before
			resuming use. After
			five seconds, this message will
	P		disappear, the monitor will
		Battery temperature is	turn off, and the power-on
	Battery temperature				17
		high.	lamp and flash lamp will blink
	high
			rapidly. After the lamps blink
			for three minutes, the camera
			will turn off automatically.
			Pressing the power switch
			also turns off the camera.
	Q(● blinks red)	Camera cannot focus.	•	Refocus.	26, 27
			•	Use focus lock.	45
Technical	P	Camera cannot perform	Wait until message clears
	recording.
	Please wait for the	other operations until	from display automatically		–
	camera to finish
		recording is complete.	when recording is complete.
Notes
	Memory card is write				21
	P	Write-protect switch is	Slide write-protect switch to
and	protected.	in “lock” position.	“write” position.
Index	P		•	Use approved card.	150
	This card cannot be
	used.	Error accessing memory	• Check that connectors are		20
				clean.
	P	card.
			• Confirm that memory card		20
	This card cannot be
				is correctly inserted.
	read.

152