Troubleshooting
Index and Notes Technical
Problem | Cause/Solution | A | |
Date not appearing on pictures | The current shooting mode is one that does not |
| |
even when Date imprint is | |||
support Date imprint. | |||
enabled. |
| ||
|
| ||
|
|
| |
Camera settings reset. | Clock battery is exhausted; all settings were | ||
restored to their default values. | |||
|
| ||
|
|
| |
| Battery temperature is high. Turn off camera and |
| |
Monitor turns off, and the | allow battery to cool down before resuming use. |
| |
After the lamp blinks for three minutes, the | |||
camera will turn off automatically. Pressing the |
| ||
|
| ||
| power switch also turns off the camera. |
| |
|
|
| |
| • The battery is not charged when the camera |
| |
| is turned off. |
| |
Battery inserted into the | • Charging stops if the computer enters sleep |
| |
mode while the battery is charging. The |
| ||
camera is not charged when |
| ||
camera may be turned off. | |||
the camera is connected to a | |||
• Depending upon computer specifications, |
| ||
computer. |
| ||
settings, and status, it may be impossible to |
| ||
|
| ||
| charge the battery inserted into the camera |
| |
| via computer connection. |
| |
|
|
|
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or
Shooting
Problem |
| Cause/Solution | A |
| • | When camera is in playback mode, press the | |
| • | Abutton or the |
|
No picture taken when shutter- | When menus are displayed, press the d | ||
release button is pressed. | • | button. |
|
| Battery is exhausted. | ||
| • | When flash lamp blinks, flash is charging. | |
|
|
|
|
158