User’s Manual
2. Securing the mounting plate
Because the mechanism and lens are heavy, make sure the mounting fasteners and surface are extremely secure. Remember that the sled motor will be starting and stopping a heavy weight thousands of times through normal use. Ceiling mounted lenses require a secure surface.
Sheetrock anchors alone are insufficient. Secure the mounting bar to a plate, painted board, or
Use of a commercial mounting system enabled for anamorphic lenses is highly recommended. Use all six screw holes, and tighten fasteners securely. Vibration from the motor and reciprocal lens movement will loosen any fasteners that are not absolutely tight and secure.
Do not attach the lens or power up the sled yet! Adjustment and alignment are much easier at this point without the lens.
3. Attaching the lens bracket to the adaptor plate
Remove the bracket mounting screws from the inside holes in the adaptor plate and use them to attach the lens bracket supplied with the Optoma
Holes for Ceiling or Plate
Mount (x6) Fasteners
Lens Bracket Screws (x4)
For more information, please visit our website at: | User’s Manual | 7 | |
http://www.OptomaUSA.com | |||
|
|
