Optoma Technology Digital Tuner Output Projector Using the Remote Control Power/Standby, Volume +

User Controls

Using the Remote Control

Power/Standby

Refer to the “Power On/Off the Projector” section on pages 10-11.

Re-Sync

Automatically synchronizes the projector to the input source.

Volume + / -

Increases/decreases speaker volume.

Reset

Changes the adjustments and settings to the factory default value.

Mute

Momentarily turns off the audio and video.

Keystone /

Adjusts image distortion caused by tilting the projector (±16 degrees).

Page Up (Computer mode only)

Use this button to page up. This function is only available when the projector is connected to a computer via an USB cable.

Page Down (Computer mode only)

Use this button to page down. This function is only available when the projector is connected to a computer via an USB cable.

Freeze

Press “Freeze” to pause the screen image.

Four Directional Select Keys

Use	to select items or make adjustments to
your selection.

Menu

Press “Menu” to launch the on screen display menu. To exit OSD, press “Menu” again.

Enter

Confirm your selection of items.

VGA

Press “VGA” to choose Analog RGB, component and HDTV source.

S-Video

Press “S-Video” to choose S-Video source.

Composite

Press “composite” to choose Composite video source.

15... English