Installation
Powering Off the Projector
1.Press the “Power/Standby” button to turn off the projector lamp, you will see a message “Power off the lamp?” on the
2.Press the “Power/Standby” button again to confirm. Otherwise the message will disappear after 5 seconds.
3.The cooling fans continue to operate for about 60 seconds for cooling cycle and the “Power/standby” button will turn orange. When the light begins flashing, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press “Power/ Standby” button to restart the projector.
4.Disconnect the power cord from the electrical outlet and the projector.
5.Do not turn on the projector immediately following a power off procedure.
Warning Indicator
When the “LAMP” indicator lights solid orange for about 2 minutes, the projector will automatically shut itself down. Please contact your local reseller or service center.
When the “TEMP” indicator lights solid orange, it indicates the projector has been overheated. You will see a message “Projector Overheated.” on the
Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should contact your local dealer or our service center.
When the “TEMP” indicator flashs orange for about 10 seconds, you will see a message “Fan fail. Lamp will automatically turn off soon.” on the
11... English
