User Controls
Computer Mode
Image-II
(Computer Mode)
Frequency
“Frequency”changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment.
Tracking
“Tracking” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it.
Horizontal Position
Press the | to move the image left. |
Press the | to move the image right. |
Vertical Position
Press the | to move the image down. |
Press the | to move the image up. |
Degamma
This allows to you to choose a degamma table that has been fine- tuned to bring out the best image quality for the input.
16 : 9 / 4 : 3
Use this function to choose your desired aspect ratio. 1:1 : Original image pixel.
4:3 : The input source will be scaled to fit the projection screen.
16:9 : The input source will be scaled to fit the width of the screen.
19... English
