Appendices
English ... 28
Problem: The image is outstretched when displaying 16:9 DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the aspect ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
Select “Management” from the OSD and adjust the projection direction. See page 24.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replacethe lamp, follow the procedures in the “Replacing the Lamp”. See page 29.
Problem: LED lighting message
Message | Power LED | Temp LED | Lamp LED | ||
Green | Orange | ||||
|
|
| |||
Standby State | Flashing | Off | Off | Off | |
(Input power cord) | |||||
|
|
|
| ||
Lamp lighting | On | Off | Off | Off | |
Power on | On | Off | Off | Off | |
Power off | Off | On | Off | Off | |
Error (Lamp fail) | Off | On | Off | On | |
Error (Thermal fail) | On | Off | On | Off | |
Error (Fan lock fail) | Off | On | Flashing | Off | |
Error (Over Temp.) | Off | On | On | Off | |
Error | Off | On | Off | On | |
(Lamp Breakdown) | |||||
|
|
|
|
Problem: Message Reminders
“Lamp may fail soon! Replacement suggested!” will be shown about 10 seconds when lamp life is going to deplete.
“Projector Overheated. Lamp will automatically turn off soon.” will be shown when the system temperature is over heat.
“Fan fail. Lamp will automatically turn off soon.” will be shown when the fan is out of order.