Installation

Powering On/Off the Projector

Powering On the Projector

1.Remove the lens cap.n

2.Ensure that the power cord and signal cable are securely connected. The “Power/Standby” button will flash green.

3.Turn on the lamp by pressing “Power/Standby” button on the control panel. And the “Power/Standby” button will turn green.o

The startup screen will display for 30 seconds.

4.Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.

™If the screen displays “No Signal”, please make sure the signal cables are securely connected.

™If you connect multiple sources at the same time, use the “Source” button on the remote control or control panel to switch.

2 Power/

Standby

™Turn on the projector first and then the signal sources.

1

Lens cap

English ... 10

Page 10
Image 10
Optoma Technology Digital Tuner Output Projector specifications Powering On/Off the Projector, Powering On the Projector