Optoma Technology EP718 specifications Connecting the Projector to Other Video Sources, English

11

English

Connecting the Projector to Other Video Sources

vIf your video player uses a round, one-prong composite video connector, you’ll need the video cable. If your video player uses a round, four-prong s-video connector, you’ll need the s-video cable ( See page 12 for detail information).

Both cables are shipped with the projector.

If you use the video cable:

1.Plug the video cable connector into the “Video out”port on your video player; plug the other end into the “Video”port on your projector.

2.Plug the audio cable white connector into the left “Audio out” port on your video player; plug the cable’s red connector into the right “Audio out” port on the video player; plug the other end into the “Audio in” port on your projector.

3.If you need to use an external speaker (built in amplifier), plug the audio cable white connector into the “Audio in” port on your speaker; plug the cable’s red connector into the red “Audio in” port on the speaker; plug the other end into the “Audio out”

port on the projector.

4.Connect one end of the power cord into the back of projector; connect the other end to an electrical outlet.

VideoOutput AudioOutput

	Audio In Port
Audio Cable
Video Cable	Video Port
Power Cord

Audio Cable

Audio Out Port