Optoma Technology EP718 specifications Powering Off the Projection Display

14

English

uPowering Off the Projection Display

1.Press the “Power/Standby” button to turn off the projector lamp.

2.After pressing the “Power/Standby” button, you will see a message “ Power off the lamp? ” on the on-screen display. Press the “Power/Standby” button again to confirm. Otherwise the message will disappear after 5 seconds.

3.“LAMP “ LED indicator will flash amber for about one minute. After the “LAMP” LED indicator stops flashing , you can turn off the main power switch on the back of the projector.

*If you want to turn on the main power switch immediately, you must allow about 10 minutes for thermal dissipation.

4.Disconnect the power cord from the electrical outlet and the projector.

*When the “LAMP” indicator lights solid amber; please change the lamp module immediately.

*When the “TEMP” indicator lights solid amber, it indicates the display has been overheated. The display will automatically shut itself down. Under normal conditions, the display can be switched on again for your presentation. If the problem persists, you should contact your local dealer or our service center.