Optoma Technology W304M manual User Controls, Control Panel, Keystone+, English

User Controls

Control Panel

™™AV mute: Save up to 70%

of the lamp power when AV mute is applied.

Using the Control Panel

Power	Refer to the “Power On/Off the Projector”
	section on page 15.
Menu	Press Menu to launch the on-screen display
	(OSD) menu. To exit OSD, Press Menu again.
▲/Keystone+	• Adjust the image Keystone positively.
(Up arrow)	• Navigates and changes settings in the OSD.
►/Re-Sync	• Automatically synchronizes the		projector to
	the input source.
(Right arrow)
	• Navigates and changes settings in the OSD.
▼/Keystone -	• Adjust the image Keystone negatively.
(Down arrow)	• Navigates and changes settings in the OSD.
◄/Source	• Press Source to select an input signal.
(Left arrow)	• Navigates and changes settings in the OSD.
AV-Mute	Momentarily turns off / on the audio and video.
Enter	Confirm your item selection.
	Green	Unit is standby or powered on and
		working correctly.
Power LED	Flashing	Unit is warming up/cooling down /
	Green	on Quick Resume (100 sec).
	Off	Unit is powered off.
	On	Lamp not ready—do not press the
Lamp LED		Power button.
	Off	Lamp is in normal state.
Temp LED	On	System over temperature
	Off	Normal state
		19	English