E N G L I S H

5.Many times blockage occurs due to a full dust bag causing dirt to back down the air flow system. When that happens, the blockage will be at the top of the system, starting in the area where the dust bag connects to the connector assembly. See illustration F.

F

Connector

Deflector

Opening

To Adjust or Replace Brush

WARNING: Unplug cord from electrical outlet before servicing.

To determine if the brush is worn, place a firm straight edge across the nozzle opening. If brush bristles do not extend beyond baseplate, brush should be adjusted.

NOTE: If the above actions do not correct the problem, contact an ORECK authorized service center or call the customer service center. US: 1-800-989-3535

CANADA: 1-888-676-7325

IMPORTANT: On plush and new carpets, stuffing may occur due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner, many older carpets will cause stuffing when the cleaner is first used on them.

Using A Fresh Air® Tab

Your ORECK XL vacuum cleaner has a special FRESH AIR tab pocket. This light-colored pocket is located inside the vinyl bag in the area where the paper disposable bag attaches to the intake

Rotate and match

bearing assemblies

Remove the baseplate by removing 5 screws. Then, remove the belt and brush roll from the housing.

Rotate both bearing assemblies at ends of brush roll to show “old” and replace in the holding channels in the housing.

NOTE: The bearing assembly setting marked “OLD” has two bars (ll) on the top of the assembly. The one marked “NEW” has one bar ( l ). When rotating bearings, make sure both bearing assembly settings are the same and face up when replacing the brush roll.

tube. Insert tablet in pocket.

Reassemble the belt and the baseplate and check bristle height above baseplate at each end of brush.

Bulb Replacement

WARNING: Unplug cord from electrical outlet before servicing.

• Remove lamp housing by removing two (2) screws in the the top of the lamp housing.

• Pull burned out bulb from holder and replace with new bulb.

• Replace lamp housing by replacing two screws in the top of the lamp housing.

IMPORTANT: Unless the brush is worn as indicated above, both bearings must be in the new position. When rotating, both bearings must be in the old position. Unmatched settings will cause damage to your machine.

If a previous adjustment has already been made and bristle height does not extend above baseplate, a new brush assembly should be ordered.

7

Page 6 Page 8
Page 7
Image 7
Oreck XL2600HH To Adjust or Replace Brush, Using a Fresh Air Tab, Bulb Replacement, Connector Deflector Opening, Canada
Page 6 Page 8

XL2700RH, XL2610HH, XL2700HH, XL2600HH specifications

The Oreck XL series of vacuum cleaners, including models XL2600HH, XL2700HH, XL2610HH, and XL2700RH, represents a pinnacle in lightweight cleaning technology. Designed for both efficiency and user comfort, these models cater to a variety of floor types and cleaning needs, making them ideal for residential and commercial spaces alike.

One of the standout features of the Oreck XL series is their lightweight design. Weighing around 8 pounds, these vacuums are easy to maneuver, reducing fatigue during extended cleaning sessions. Their slim profile ensures they can easily reach under furniture and into tight corners, maximizing cleaning potential.

The XL2600HH and XL2700HH models are equipped with Oreck's proprietary, high-speed roller brush technology. This feature allows for effective deep cleaning while lifting dirt, dust, and allergens from carpets and bare floors. The brushes rotate at a high velocity, enabling the machines to dig deep into carpet fibers and extract particles that other vacuums may leave behind.

Another important aspect of these models is their multi-floor capability. Whether you're cleaning carpet, tile, hardwood, or laminate, the XL series provides versatile cleaning solutions. The adjustable floor settings seamlessly adapt to different surfaces, allowing users to switch from one type of flooring to another without losing suction power.

The Oreck XL2610HH and XL2700RH models highlight advanced air filtration systems, including a HEPA filtration option that effectively captures 99.97% of particles as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers, as it helps maintain a cleaner indoor air environment.

Additionally, the XL series boasts a unique top-fill design, allowing the bags to fill completely without losing suction. This design maximizes efficiency by utilizing all the available space within the bag.

Furthermore, the Oreck Vacuums come with a warranty, demonstrating the manufacturer's confidence in their durability and performance. With their combination of lightweight design, advanced features, and effective cleaning capabilities, the Oreck XL2600HH, XL2700HH, XL2610HH, and XL2700RH vacuum cleaners stand out as reliable choices for maintaining cleanliness in any space.
Top Page Image Contents