How to Replace a Worn Belt, Stuffing or Blockage

E N G L I S H

How to Replace a Worn Belt

WARNING: Unplug cord from electrical outlet before servicing.

Remove the replacement belt from the storage channel.

Stuffing or Blockage

Under certain conditions it is possible to stuff or block the intake tube and the lower tube assembly. If your vacuum cleaner does not pick up properly, or makes unusual noise and the outer bag does not fluff up or balloon open, follow the following steps:

WARNING: Unplug cord from electrical outlet before servicing.

NEW PHOTO

Remove the door by removing the hold down screw located on side of power head.

Slide the door forward by prying open with a screwdriver or coin.

Remove the belt from the brush roll pulley and the motor drive shaft.

Loop the new belt over the motor drive shaft. Place the opposite end of the belt on the top of the brush pulley and roll the belt around the pulley.

Rotate the brush roll three

(3)complete revolutions to ensure the belt is properly seated behind the belt retainer.

Replace the door by sliding it into the groove at the bottom of the housing. Replace the hold down screw.

A	➧
	Intake Opening

B	➧
B	Intake Opening

	Retainer
	Spring

Fan

Housing

O-ring

1.Check for blockage at the mouth of the intake opening. See illustration A. If there is blockage, remove it with long-nose pliers, a screwdriver or coat hanger. If you can not reach the blockage, remove baseplate. See illustration B.

2.If the blockage is not at the base, remove lower tube. See illustration C. Unhook retainer spring, releasing bottom of bag. Twist lower collar counterclockwise to slide up. Pull tube out of base. Check for blockage. If blockage is in the tube, remove with a coat hanger.

3.If tube is not blocked, look into fan housing. See illus- tration D. Remove debris with long-nose pliers, a screwdriver or coat hanger.

4.To reassemble, check O-ring on tube, and replace if damaged. Vacuum will not operate properly without the tube O-ring. Slide O-ring to approximately 2" from base of tube. Replace tube by first lining up slot at base of tube with inner tab inside fan housing. Then reinsert tube and push down until the tube is seated. Make sure O-ring is in place against fan housing opening. Replace and tighten collar until collar locking tabs are locked in place. See illustration E. Make sure collar is not cross threaded on housing.

XL2700RH, XL2610HH, XL2700HH, XL2600HH specifications

The Oreck XL series of vacuum cleaners, including models XL2600HH, XL2700HH, XL2610HH, and XL2700RH, represents a pinnacle in lightweight cleaning technology. Designed for both efficiency and user comfort, these models cater to a variety of floor types and cleaning needs, making them ideal for residential and commercial spaces alike.

One of the standout features of the Oreck XL series is their lightweight design. Weighing around 8 pounds, these vacuums are easy to maneuver, reducing fatigue during extended cleaning sessions. Their slim profile ensures they can easily reach under furniture and into tight corners, maximizing cleaning potential.

The XL2600HH and XL2700HH models are equipped with Oreck's proprietary, high-speed roller brush technology. This feature allows for effective deep cleaning while lifting dirt, dust, and allergens from carpets and bare floors. The brushes rotate at a high velocity, enabling the machines to dig deep into carpet fibers and extract particles that other vacuums may leave behind.

Another important aspect of these models is their multi-floor capability. Whether you're cleaning carpet, tile, hardwood, or laminate, the XL series provides versatile cleaning solutions. The adjustable floor settings seamlessly adapt to different surfaces, allowing users to switch from one type of flooring to another without losing suction power.

The Oreck XL2610HH and XL2700RH models highlight advanced air filtration systems, including a HEPA filtration option that effectively captures 99.97% of particles as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers, as it helps maintain a cleaner indoor air environment.

Additionally, the XL series boasts a unique top-fill design, allowing the bags to fill completely without losing suction. This design maximizes efficiency by utilizing all the available space within the bag.

Furthermore, the Oreck Vacuums come with a warranty, demonstrating the manufacturer's confidence in their durability and performance. With their combination of lightweight design, advanced features, and effective cleaning capabilities, the Oreck XL2600HH, XL2700HH, XL2610HH, and XL2700RH vacuum cleaners stand out as reliable choices for maintaining cleanliness in any space.

Oreck XL2700RH, XL2700HH How to Replace a Worn Belt, Stuffing or Blockage, Fan Housing Ring

Models: XL2700RH XL2610HH XL2700HH XL2600HH