Oregon manual Camera Mounting Description, To mount ATC-1000using the handlebar strap

HC18_manual_1_sep 9/2/05 16:50 Page 5

V) Camera Mounting Description

The ATC-1000can be mounted in a variety of different ways using the straps and Velcro patch provided. Please follow the suggested methods of mounting as follows:

To mount ATC-1000using the handlebar strap:

1.Place the handlebar grip on the handlebar.

2.Place the dual-locking grip on the handlebar grip.

3.Slide the strap through the base of the dual-locking grip and fasten around the handlebar grip.

4.Slide the ATC-1000into the dual-locking grip. You can adjust the angle of the camera by 10° at a time.

To mount ATC-1000using Velcro straps:

1.Attach the rubberized patch to the underside of the dual-locking grip.

2.Place the dual-locking grip on the helmet, and

thread the Velcro strap through its base.

3.Secure the Velcro strap by fastening it through the helmet vents.

4.Slide the ATC-1000into the dual-locking grip. You can adjust the angle of the camera by 10° at a time.

5 6