Oregon Scientific atc-2k manual SD Memory Card, Available Recording Time

AT18_manual_UK_31Jan2007 2/2/07 6:15 PM Page 12

SD Memory Card

In this unit, you can use SD Memory Cards which have storage capacity of between 8MB to 2GB.

To use a SD memory card, turn off the ATC-2K and insert the SD memory card. When the camera is turned on again the SD card icon will be displayed on the LCD.

The remaining time will also be displayed on the LCD. All the new captured video footage will be saved onto the SD card.

Note:

1.If there is an error on the SD memory card, the SD card icon and the letters 'Err' will be displayed on the LCD. In this case, turn off the camera and remove the SD card.

2.The SD card is equipped with a Write-Protect switch that can prevent writing and formatting to the card. The letters 'Err' will be displayed if the SD card is locked with Write-Protect switch.

3.Keep the Memory Card out of reach of children to prevent swallowing.

4.We recommend using SanDisk regular or Sandisk Ultra II SD card.

21

Available Recording Time

The available recording time is an approximation. (These vary depending on the recording conditions and the type of card.

Picture quality		VGA	VGA	QVGA	QVGA	QQVGA	QQVGA
setting		30 fps	15 fps	30 fps	15 fps	30 fps	15 fps
Internal	32 MB	52 s	1 min 20 s	1 min 36 s	3 min 14 s	5 min	11 min 10 s
Memory
	32 MB	52 s	1 min 20 s	1 min 36 s	3 min 14 s	5 min	11 min 10 s
	64 MB	2 min	3 min	4 min	7 min	11 min	25 min
SD	128 MB	4 min	6 min	7 min	14 min	23 min	50 min
Memory	256 MB	8 min	12 min	14 min	28 min	45 min	99 min
Card
	512 MB	15 min	24 min	28 min	57 min	89 min	198 min
	1 GB	30 min	48 min	57 min	115 min	178 min	397 min
	2 GB	60 min	96 min	114 min	230 min	356 min	794 min

22