7
EN
2. Press and hold SET for 2 seconds to enter setting
mode.
3. Press / to select countdown or count-up timer
and press SET. If the countdown timer is selected you
will need to set the hr:min:sec by pressing / to
change a value and SET to confirm.
To use timer:
•Press to start / stop the timer.
•Press and hold to reset the timer.
•Press repeatedly to view timer step, distance and
calories values.
When you are in the timer display will show. If
you are in another mode, will flash to indicate the timer
is running.
MEMORY
The pedometer has a 7-day memory function. You can
view total weekly or daily step, distance and calorie
records.
VIEW TOTAL WEEKLY RECORDS
1. Press MODE to
navigate to
Memory Mode.
2. Press to toggle between the total weekly step,
distance and calorie display.
VIEW DAILY RECORDS
1. Press MODE to navigate to Memory Mode.
2. Press to enter the daily record display.
3. Press repeatedly until you reach the day you wish
to view. When you have selected the day you wish to
view a 1-second display will show to advise you if you
reached that days target or not:
•Target achieved =
smiley face and high
beep sound.
•Target not achieved
= sad face and low
beep sound.
4. Press to toggle between your chosen days step,
distance and calorie display.
IMPORTANT At midnight all accumulated daily data will
be stored for a period of 7 days. Therefore, once a memory
has been stored for 7 days it is replaced with new data
from the 1st day of the new week.
PE82X_M_EN_V2.p65 2005.7.19, 12:17 PM7