EN
TARGET
To set step, distance or calorie target:
1.Press MODE to navigate to Target Mode.
2.Press and hold SET for 2 seconds to enter setting mode.
3. Press 
/ 
to select STEP, DISTANCE or CALORIES.
4. Press SET to confirm.
5. Press 
/ 
to change the value of each digit, and SET to confirm and move on to the next setting.
To use target:
1.Once the target has been set, start walking to activate the pedometer. The GO! screen will appear to confirm that the unit is starting to monitor your progress.
6
2.While you are walking, the ESTIMATED FINISH TIME (EFT) will periodically appear to advise you how long it will take to complete your target, based on your current pace. The target bar at the bottom of the display will move from left to right (start to finish) to show your progress.
3.Press 
to toggle between the EFT and remaining steps, distance or calories left until target is reached.
4.When target walk is
complete, FINISH will appear and a beep will sound.
5.To reset the target for the next user session, press and hold RESET.
TIMER
When the timer is running, it will measure steps, distance and calories. These measurements are not linked to the daily measurements and are only related to the time spent walking while the timer is on.
To set timer:
1. Press MODE to navigate to Timer Mode.
PE82X_M_EN_V2.p65 | 6 | 2005.7.19, 12:17 PM |
