CHANGE SETTINGS
Press and hold SELECT for 2 seconds. Then, press UP or DOWN to change each setting. Press SELECT to switch options.
REMOTE UNIT SET UP
Up to 3 remote units can be used with this product to monitor outdoor temperature and humidity. The measurement unit (°C or °F) and channel number (1, 2, or 3) switches are located in the battery compartment, and should be set prior to installation.
NOTE Additional remote units sold separately. If you are using more than one remote unit, be sure to select a different channel number for each unit.
9
EN
INSTALLATION
Mount the remote unit on a flat surface using the recess hole on the back of the unit.
For best results:
•Before you insert the batteries, select the measurement unit and channel number first.
•Place the unit out of direct sunlight and moisture.
•Do not place the remote unit more than
20 - 30 meters (60 - 90 feet) from the main (indoor) unit.
•Position the unit so that it faces the main (indoor) unit. Minimize obstructions such as doors, walls, and furniture.
You may need to experiment with various locations to get the best reception.
PS M03 English R18 | 9 | 7/16/03, 1:04 PM |
