EN
17
To flip the projected time upside down:
1. Press the SNOOZE / LIGHT button.
2. While the projector is on, press the SNOOZE / LIGHT
button again to flip the time.
3. To flip again, press the SNOOZE / LIGHT button
again, etc.
THE VIBRATING DEVICE (OPTIONAL)The vibrating wake-up device receives a signal from the
main unit and performs a wake-up function by vibrating.
It is designed to go under your pillow. You can purchase
the device separately.
The device has a range of roughly 15 meters and has
an LED meter to show data transmission and battery
level.
The light on the vibration device will flash in red when
the battery is low, and the light will flash in green when
the battery power is full.
The switch within the vibrating device can adjust to
alarm 1 or alarm 2, or both. Simply select the alarm time
when you want the device to wake you up.
ANIMATION ON / OFF SETTING
To set the animation on:
1. Press and hold the PROJECTION ON button for
2 seconds.
2. Select the animation speed by using the UP and
DOWN buttons.
3. Press the PROJECTION ON button
4. Use the UP and DOWN buttons to select "on" or
"off."
5. Press the PROJECTION ON button to confirm.
The animation feature will move the image of
the time, alarm on/off status and alarm time in a
cascading and random motion, which is pleasant to the
eye.
NOTE
RM818P English R7 OP 9/10/04, 3:21 PM17
Black