1.Locate the battery compartment.

2.Install the batteries by matching the correct polarity. Always use the correct battery type (2 x UM-4 AAA-sized 1.5V batteries).

WARNING Reversing the polarity may damage the product.

NOTE Replace the batteries whenever the low battery

icon is shown , the display is dim, or the display

does not illuminate when the power is on. Replace all the batteries at the same time-it is dangerous to mix old and new batteries.

ADAPTOR

By plugging in the adaptor, the projector will project the time on the wall / ceiling continuously.

EN

7

RM818P English R7 OP

7

9/10/04, 3:20 PM

Black

Page 8
Image 8
Oregon Scientific RM818P user manual Adaptor