Oregon Scientific RRM902 user manual Clock Clock Reception, Manually SET Clock

NOTE If the sensor is not found, check the batteries, obstructions and remote unit location. Press and hold SEARCH to force another sensor search.

For best results:

•Place the sensor out of direct sunlight and moisture.

•Position the sensor so that it faces the main unit, minimizing obstructions such as doors, walls and furniture.

•Place the sensor in a location with a clear view to the sky, away from metallic / electronic objects.

•Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission.

TIP Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 1.5m (5 ft) and which can shield it from direct sunlight or wet conditions for an accurate reading.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock automatically with a clock signal.

RRM902: EU: DCF-77 signal: within 1500km (932 miles) of Frankfurt, Germany.

RRM902U: UK: MSF-60 signal: within 1500km (932 miles)	EN
of Anthorn, England.
RRM902A: US: WWVB-60 signal: within 3200km (2000
miles) of Fort Collins, Colorado.

To enable / disable signal reception:

Press and hold	VOL+ to enable, or	VOL- to
disable signal reception.

NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal.

If signal reception is unsuccessful, place your unit next to

a window, press and hold	VOL+ to force another
signal search.
Clock signal reception indicator:
STRONG SIGNAL	WEAK / NO SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the clock signal reception first.

5