EN
NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter.
1 x CR2032 battery for memory back-up
To insert batteries:
1.Remove the battery compartment cover.
2.Insert the battery, matching the polarities.
3.Press RESET after each battery change.
LOCATION | MEANING | |
|
| |
Clock area | Main unit batteries low | |
|
| |
Outdoor temperature | Sensor batteries low | |
area | ||
| ||
|
|
TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.
NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
REMOTE SENSOR
To set up the remote sensor:
1.Slide open the battery compartment.
2.Slide channel switch to select channel 1.
3.Insert the battery, matching the polarities.
4.Press RESET after each battery change.
5.Close the battery compartment.
6.Press and hold SEARCH on main unit to initiate search and start receiving time and temperature data from the sensor.
7.Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount.
4
SENSOR DATA TRANSMISSION
Outdoor sensor:
The sensor reception icon in the remote sensor area shows the status:
ICON | DESCRIPTION | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Main unit is searching |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| for sensor(s) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A channel has been |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| found |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The sensor cannot be |
|
|
|
|
|
|
|
|
| found |
|
|
|
|
|
|
|
|
|
|
