Oregon Scientific RRM902 user manual Music from External Audio Device, Volume Control, Alarm

4. Once desired frequency has been found, press and hold

to save. Station number (e.g.,	) indicates
where it has been stored.

5. Repeat steps 2 – 4 for all storage locations.

For your convenience, the volume and radio frequency will be stored in memory for the next time radio is turned on.

To view alarm display (when radio is on):

• Press .

MUSIC FROM EXTERNAL AUDIO DEVICE

Using a cable, plug one end to your music storage device

and one end to audio line-in socket (	) located at the
back of unit.

When cable has been successfully connected, will be displayed on the LCD screen and sound will emit from speakers.

NOTE

•To play music from external audio device, ensure soothing sound and radio is turned off.

•Connecting / disconnecting of external audio device will turn the alarm off.

VOLUME CONTROL

• Press VOL+ or VOL-.

EN

ALARM

To set the alarm:

1.	Press and hold .
2.	Press	VOL+ or	VOL- to change the
	settings.

3.Press to confirm.

The setting order is: Hour, minute, alarm option (

soothing sound / beep or Radio), sound type (1-8: soothing sound, 9: beep) or radio station, volume (cannot be adjusted for beep alarm).

To toggle alarms ON / OFF:

1. Press to display alarm time.

2.Press again to turn alarm ON / OFF. indicates alarm is on.

To silence the alarm:

•Touch SNOOZE · SOUND to silence it for 8 minutes

OR

•Press any other key (except DIMMER) to turn the alarm off and activate it again after 24 hours.

7