Selecting a Channel, Ctcss Scanning | Oregon Scientific TP380

Roger Beep Enable/disable beep heard after the finish of a received transmission

Key Tone Enable/disable beep when a key on the transceiver is pressed

Vibrating Enable/disable vibration function

Automatic Enable/disable automatic shut-off after

Power-Off device is idle for 2 hours

NOTE: Press MENU to confirm and move to the next setting. To confirm the changes but quit the Menu Options, press PTT.

SELECTING A CHANNEL

Select between 8 channels. The transmitter and receiver must be on the same channel.

1.Press MENU once until the channel number starts flashing on the LCD.

2.Press and hold or to begin scanning a channel. If a valid signal is present, the transceiver will pause on the current active channel.

3.Press PTT to stop scanning and exit the menu. Or, press MENU to stop scanning and go to the next Menu Option.

You can activate the channel scan function:

1.Press MENU twice until the CTCSS number starts flashing on the LCD.