EN
2.Press and hold 
or 
to begin scanning a CTCSS channel. If a valid signal is present, the transceiver will pause on the current active channel.
3.Press PTT to set and store the CTCSS channel, or the transceiver stores the display setting after 15 seconds. The scan mode will immediately search for the next CTCSS channel if no button is pressed after 5 seconds.
4.Press PTT to stop scanning and exit the menu. Or, press MENU to stop scanning and go to the next Menu Option.
SETTING VOX & BABY MONITOR
This setting automatically detects and transmits your voice through the selected channel, without needing to push and hold PPT.
1. Press MENU 3 consecutive times until
appears on the LCD.
2.Select between 6 levels of VOX by pressing 
or 
key.
LCD SYMBOL DESCRIPTION
0VOX disabled
1Low sensitivity – only audibly loud voices are transmitted(useful for noisy environments)
12
