NOTE: 1. Use 3 AAA alkaline or rechargeable batteries when operating this unit. Before charging, study the user manual section on “Charging Contacts” for further instructions.
2.Reset: At any time if the unit can’t work properly, please take off the batteries and insert them again.
TALKING INTO TRANSCEIVER
1.Hold down the PTT button and speak into the MIC to transmit
( 
appears on the LCD). When finished, release the button.
2. The transceiver will automatically play received transmissions.
NOTE: You can only communicate with another radio that is using the same channel and/or CTCSS code as your radio.
CALL FUNCTION
You can send a ringer sound to all transceivers tuned to the same channel and / or the CTCSS code as your transceivers by pressing PTT.
1.Push PTT to talk.
2.Press PTT twice in rapid succession to enable the Call Tone function.
3.Confirm selection in MENU mode.
USING THE KEY LOCK
You can lock the buttons on the transceiver to avoid accidentally enabling the device. To enable/disable key lock, press PWR + MENU simultaneously. The lock symbol will show on the LCD.
9
EN
