Operation
Setting up the answering system
On the rear of the answering system you will find a slide switch with which you can set to select how many times the phone rings before incoming calls are answered.
2The call will be answered after 2 rings.
6The call will be answered after 6 rings.
TS In Toll Saver mode incoming calls are answered after six rings until the first new message has been recorded. Once a message has been recorded the answering system will answer.
NOTE:
The Toll Saver function enables the user to check remotely for new messages without incurring a call charge.
General operation
The answering system can be switched off (standby) or on using the 
button. If the answering system is switched off, the display shows the message and no messages will be recorded.
The maximum length for incoming messages is 120 seconds. If the caller speaks for longer, a signal tone sounds and the call will be cut off. If there is a pause of more than 7 seconds during recording, the call is automatically terminated with a signal tone. No more calls will be answered if the memory capacity for new messages is exhausted and the message FL will appear in the display.
Listening to incoming messages
The integral speaker makes it possible to listen to incoming calls without speaking to the caller (sometimes called "Call Screening"). If you do not want to listen in to the incoming calls, set the volume right down by repeatedly pressing the arrow button.
10
