14
Remote Access
Replay all recorded messages Press 2 and #
Replay newly recorded messages Press 2 and 5
Room mornitoring Press 0 and #
While playing back, you have the following options:
Skip next message Press 7 and #
Repeat current message Press 8 and #
Repeat previous message Press 6 and #
Deletecurrentmessage Press3and#
Stop current message Press # and #
After the last message, the system answers with several tones. Now,
within the next 20 seconds, you have various possibilities. If you do
not make any input within 20 seconds, the connection will be cut off
automatically and all messages will remain saved.
Record memo Press 8 and #
Repeat all messages Press 2 and #
Deleteallmessages Press3and#
Switch off answering system Press 9 and #
After this input, the answering system is no longer ready for operation.
Save all messages no input required
Re-record greeting using remote access
1. Call your own telephone number and allow the greeting message to
play through to the end. Wait until your answering system is ready to
record a message.
2. After the tone, enter your personal authorization code by pressing the
appropriate numbers on the telephone. Two tones confirm that the
right code has been entered.
3. To re-record the greeting message, press the key combination 7 and #.
Dictateyournewgreetingafterthesignaltone.
4. Complete the recording with the keys 7 and #. The new greeting will
now be repeated.
5. Finish the call by hanging up.