Operation
Interrupting the answering system
You can personally intervene at any time while the caller is leaving their message. Simply lift the receiver of a parallel phone or press ON/OFF button on the answering machine. The answering system will stop recording and you can speak directly to the caller.
Listening to messages
The display shows the total number of messages recorded.
Listening to messages
Press the PLAY/PAUSE button once. Your system will play back the newly recorded messages first. If you have no new messages, all recorded messages will be played back. If no messages have been saved, you will hear several tones.
If you want to stop listening to messages, press the PLAY/PAUSE button. Pressing the PLAY/PAUSE button again within 7 seconds, will
resume playback where you left off. Pressing the 
button will stop message playback. After the last message has been played, the unit responds with two tones. The speaker volume can be boosted up to +40dB max during message playback. Press the BOOST button, and the BOOST LED will light. You can then adjust the tone cotrol by turning the tone control wheel .You can turn OFF the BOOST by pressing the BOOST button at anytime during message playback.
NOTE:
If you do not need this additional amplification you do not need to press the BOOST button.
Using the optional headset
You can use a headset with a 3.5mm plug (headset not supplied) to listen to the messages. simply plug in the headset to the socket in the rear of the Answering System.
11
