15
Remote Access
Switching on remotely Imagine that you have left your ofce or your house and have forgotten to
switch on your answering system. Using the remote access facility, you
can switch on the answering system from another telephone.
1. Call your number and let it ring until your call is answered by your
answeringsystem(ca.10times).
2. After the signal tone, enter your personal authorisation code. Two tones
conrm that the right code has been entered.
3. Press the keys 9 and # and your answering system will be switched
on.
4. Now hang up the call or make use of further remote access functions.
Remote access with insufcient memory capacity You can control your answering system at any time using the remote
access facility. If, however, there is no memory left for new messages, the
answering system will no longer accept calls. In this case, please proceed
as follows:
1 Call your number.
2. Let it ring 10 times and your answering system will respond with three
tones.
3. Now enter your authorisation code.You will hear two tones in
confirmation, you now have the possibility of freeing more memory
space by deleting messages. To do this, rst listen to the messages
and then delete individual messages or all messages. See also Item
Remote access facilities.