PROGRAMMING MICROPHONE
ACCESSORY GAIN LEVEL
To configure the Accessory Microphone Gain Level, enter ’Programming Mode’ and scroll through the programming options by short pressing the PTT button.
| The current accessory microphone gain level | ||
PROGRAMMING FEATURES | setting will be blinking. You can select the | ||
desired gain level (1=Low gain,2= Medium gain | |||
| |||
| or 3= High gain) by pressing the | / | |
| buttons. |
| |
| MIC |
| |
Once you have selected the gain level you want to program, long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.
English 48
Note: The values available for accessory microphone gain level are dependent upon maximum levels the radio supports.
OTHER PROGRAMMING FEATURES
Scan
Scan allows you to monitor other channels to detect conversations.
When the radio detects a transmission, it will stop scanning and stays on the active channel. This allows you to listen and talk to the people on that channel without having to change the Channel Knob. If there is talking going on Channel 2 during this time, the radio will stay on Channel 1 and you will not hear Channel 2. After talking has stopped in Channel 1, the radio will wait for 5 seconds before resuming Scan again.
•To start scanning, press the SB2 button (*). When the radio detects channel activity, it will stop on that channel until activity on the channel ends. You can talk to the person(s)
