Once you have selected the channel, proceed to enable (‘YES’) or disable (‘NO’) the scan feature by toggling the SB2 (*) button. Once you have set the values you need, long press the PTT button to save an exit.
Notes:
| • (*)This assumes the SB2 button is not being | |||
| ||||
PROGRAMMING FEATURES |
|
| programmed for a different mode. | |
• If the MAX CHAN setting in the radio is set to | ||||
| ||||
|
|
| 1, the Scan Programming option will not show | |
|
|
| (will be disabled). | |
| PROGRAMMING BUTTONS | |||
| You can map any channel to either button B or | |||
| C as a preset channel. To enable, enter | |||
| ’Programming Mode’ and choose the channel | |||
| you want to set as preset channel using the / | |||
| ||||
|
|
| buttons. Once you have selected your | |
| channel, press and hold the B or C button for 2- | |||
| 3 seconds. | |||
| A short press of either preset button (B and C) | |||
| will play a good key chirp. | |||
English 50
When scanning, a short press of either preset button will change the home channel to the preset channel. The radio will display FREQ/PL and will continue to scan from the new home channel.
EDITING CHANNEL ALIAS NAME
To edit a channel’s alias, turn ON the radio and press and hold the PTT button and the 
/ 
buttons for 3 seconds. Upon entering the ‘Channel Alias Mode’, the radio will generate a special beep. You will see the current channel alias name and channel number blinking as follows:
Choose the channel number you want to edit by pressing the 
/ 
buttons. Once you have selected the channel number, press the PTT button or MENU to start editing the channel
