| Cloning Radios using the CPS (Computer |
| Programming Software) |
| To clone RDX™ radios using the CPS |
| software, you will need to have available the |
| CPS, a |
| Programming Cable. Information on how to |
| clone using the CPS is available either in |
| |
PROGRAMMING FEATURES | • the CPS Help File |
accessories refer to the Accessories Section. | |
| Cloning Radios or |
| • in the CPS Programming Cable Accessory |
| Leaflet. |
| To order the CPS programming cable, please |
| refer to P/N RKN4155. For details about |
Repeater Capabilities
Programming Repeater Capability
You can only program Repeater Frequencies if your radio has been previously configured via
the CPS. The repeater icon |
| will appear |
solid, and the MENU options | for | programming |
TX frequencies, TX CTCSS/DPL codes and TX
English 60
Bandwidth will be available. If the repeater feature is mapped (using CPS) to one of the radio buttons, then the repeater icon will blink. This indicates that you can use the repeater ‘button’ to toggle ON/OFF repeater. If repeater is not enabled in the radio this icon will not be displayed.
Once you have selected the channel you want to set up for repeater operation, you can move between the Programming options by short pressing the PTT or MENU button to program the frequency, code and bandwidth for the repeater channel.
