CLONING RADIOS
You can clone RDX™ Series radio profiles from one radio (the ‘Source’ radio) to a second radio (the ‘Target’ radio) by using any one of these 3 methods:
| • One Multi Unit Charger (optional accessory) | |
| • Two Single Unit Chargers and a | |
PROGRAMMING FEATURES | Radio cloning cable (optional accessory) | |
• the CPS (free software download) | ||
| ||
| Cloning with a |
The MUC is capable of cloning radios. To do so, there must be at least two radios,
•a Source radio (radio which profiles will be cloned or copied from) and
English 56
•a Target radio (the radio which profile will be cloned from the source radio).
The Source radio has to be in Pocket 1, 3 or 5 while the Source radio to be cloned has to be in Pockets 2, 4 or 6, matching in the MUCs pockets by pairs as follows: 1 and 2 or 3 and 4 or 5 and 6 (*).
When cloning, the MUC does not need to be plugged into a power source, but ALL radios require charged batteries.
1.Turn ON the Target radio and place it into one of the MUC Target Pockets
2.Power the Source radio following the sequence below:
•Long press the PTT button and SB2 simultaneously while turning the radio ON.
•Wait for 3 seconds before releasing the buttons until a distinctive audible tone is heard.
