radio will sound the call tone selected (except for setting ‘0’). Once you have selected the tone you want to program, long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving

Note: The values available for Call Tones are dependent upon the values programmed via the CPS. When the call tone setting is ‘0’ it means it is disabled.

PROGRAMMING MICROPHONE GAIN LEVEL

To configure the microphone gain level, enter ’Programming Mode’ and scroll through the programming options by short pressing the PTT button. When you reach the ‘Microphone

Gain Level Programming Mode’ the display will read as follows:

IMIC

The current microphone gain level setting will blink. You can select the desired microphone gain level by pressing the / buttons (1=low gain,2= Medium gain or 3= high gain).

Once you have selected the gain level you want to program, long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.

Note: The values available for microphone gain level are dependent upon maximum levels the radio supports.

PROGRAMMING FEATURES

47English

Page 49
Image 49
Motorola RDV2080d, RDU2080d manual Imic, Programming Microphone Gain Level