name. If you want to exit the Channel Aliasing Mode long press the PTT button.
•A cursor will blink at the end of the channel name. Use button B to move the cursor to the left. If you're in the first character, the radio will give you a bonk tone. Whenever you press button B and the cursor is positioned in a valid character, the button B will delete the current character and replace it with a blank space.
•Use the 
/ 
buttons to change the current selected character to the next ASCII value in alphabetical order (from A to Z). The characters will be uppercase letters.
•To toggle character between uppercase and lower case, press the A button. Note that the supported lower case characters are: b, c, d,
g, h, i, l, o, r, u. |
|
• Pressing the C button will allow you to insert |
|
special characters and numbers in the |
|
following order: 0 - 9 * {}? &%. + / - _ ' ' \. |
|
Character ' ' is a space character. |
|
• Long press the PTT button to save and go |
|
back to the ‘Channel Aliasing Selection Mode’ |
|
| |
to choose other channel to edit the alias name |
|
or exit without saving changes by turning OFF | PROGRAMMING FEATURES |
is edited and saved. | |
the radio. |
|
Notes: |
|
• If the channel alias name is left blank, the |
|
radio will play a bad key chirp and will stay in |
|
the editing menu mode until the channel name |
|
• When editing the channel alias name, if the |
|
radio is left idle after 3 seconds, the radio will |
|
accept the existing character and advance the |
|
cursor one space to the right. |
|
51 English
