To program the desired bandwidth (HI = 25 kHz, LOW = 12.5 kHz), use the 
/ 
buttons until to select the value. Long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.
Note: If the value of the bandwidth cannot be changed, the display setting remains solid.
PROGRAMMING SCRAMBLE L
The scramble feature makes your transmissions sound garbled to anyone listening without the same scramble code.
It does not guarantee confidentiality, but it adds an extra layer of privacy. Scramble default value is OFF.
Once you have entered ’Programming Mode’ and selected the channel in which you want to enable Scramble (L), scroll up/down through the programming options by short pressing the
PTT button, until your radio reaches the ‘Scramble Programming Mode’:
The current scramble setting will blink. You can select the desired scramble value (0,1,2 or 3) by pressing the 
/ 
buttons. Long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.
Note: The values available for scrambling are dependent upon the values programmed via the CPS. When the scramble setting is ‘0’ it means it is disabled.
PROGRAMMING FEATURES
45English
