Registration, Remove handsets | Oricom eco5100 Series instruction

CORDLESS HANDSET OPERATION

Registration

Register new handsets on the eco5100 base

The handsets which come in the same pack are already registered to the base. If you buy new handsets. You need to register them before use.

1. Charge the batteries (for 15 hours).

2. Register the handset (to the base unit). Each base can register up to 4 handsets.

During standby mode,

1. Press and hold key on the base unit for 10 seconds.

	The In Use light will flash.			REGISTER
	2. Press	or	key to select	REGISTER
	2. Press	or	key to select
	“REGISTER” from the display.
	3. Press	key. The display on the right is shown.		BS ?
	4. Press 1, 2, 3 or 4. The handset begins to search for			BS ?
	4. Press 1, 2, 3 or 4. The handset begins to search for
	the base.
	the base.
	5. Press	key to conﬁrm.

6. When the handset locates the base, “PIN?” will be displayed. Enter the 4 digit base


PIN code “0000” and press the		key to conﬁrm.
7. Press	key to conﬁrm and return to standby mode.

8. LCD screen will display HS 1,2,3 or 4 and antenna icon will not ﬂash.

Note: If the base is full and cannot add any more handsets, you will hear a tone. See the next section to remove a handset.

Remove handsets

During standby mode,

1. Press	key.	REMOVE HS
2. Press	or	key to select “REMOVE


HS” from the display.

23

Image 26

Oricom eco5100 Series manual Registration, Register new handsets on the eco5100 base, Remove handsets

Contents

User Guide Contents Cordless Handset Operation …………………………………………………………… Page ImportantDOYOU have BROADBAND/ADSL? Installation and ChargerGetting Started Tip Getting Started Pack contents Purchasing additional handsets Your cordless handset Understanding the cordless handset display Your eco5100 base unit Bottom GS Answering Machine Rings Code Answering Machine PIN Answering an incoming call Basic OperationDuring standby Cordless handsets LCD display Paging the handset/s Mute featureMaking an external call Normal dialling Call waiting Australia Only Recall featureHandset range Take two different calls at the same time Pause feature when using on a Pabx Recall function when connected to a Pabx Handset volume control Handsfree modeVolume adjustment with handset Store a CID number Caller ID OperationReview Caller ID records Delete one or all CID records DeleteallviewedCIDrecords LNR Function Last Number Redial Redial the last number Store the last number dialled Delete last number dialled Review / Edit / Dial stored Phonebook records PhonebookAdd new records Delete one record Handset ringer adjustment Cordless Handset Operation Multi-handset Operation Cordless handset keypad lock Call transfer between cordless handsets Remove handsets RegistrationRegister new handsets on the eco5100 base Language setting Handset name Base Melody BaseVolumeReset Answering machine On / Off Day/Time settingAnswering Machine Operation Answering machine Ring delay Setting Answering machine PIN number Setting OGM setting OGM1 Announcement One modeOGM2 AnnouncementTwo mode OGM Outgoing Messages Play OGM OGM play to line Play ICM ICM Incoming MessagesRecord ICM Record memo MemoDelete messages Play memo Delete all messages Remember to delete messagesMemory full Advanced Answering System Remote controlSwitch your answering machine on remotely Phone in to check your messages Remote operation keys Call screeningCordless handset detection Customer Support Troubleshooting Appendix Alternatively please contact Customer Service on 1300 889 Product Speciﬁcations Phone Oricom eco5100 Speciﬁcations Exclusion and limitation of liability Warranty Information AustraliaWarranty REN RN for New Zealand Caller ID Customer Support