Oricom ECO700 manual Answering Machine Operation eco700 Only, Outgoing Messages

18Answering Machine Operation (eco700 Only)

The base has a built-in digital answering machine with a recording capacity of 11 min. The answering machine can be operated remotely and features the possibility of recording two outgoing messages (OGM 1 and OGM 2) (maximum of 2 min).

There are 2 possibilities:

•With OGM 1, the caller has the possibility to leave a message

•With OGM 2, only the outgoing message is given without the caller having the opportunity to leave a message

The max. recording time for each incoming message = 3 min.

An internal voice will state various information, such as day and time of the call. The language of the internal voice is stated on the packaging!

Outgoing Messages

Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).

•Outgoing message 1 for the answering function and possibility for callers to leave a message.

•Outgoing message 2 for the answering function without allowing callers to leave a messages on the machine.

Recording outgoing messages (OGM 1 or OGM 2)

•Press and hold the [ ] key to select the OGM.

•Press the [ ] key for two seconds.

•Record the outgoing message after the beep.

•Press the Stop key [ ] to stop recording.

Playback the Outgoing Message

To check the outgoing message now set:

LED Display• Press the [ ] key.

The LED display on the base indicates how many	Note:
messages you have received. When there are new
	• It is only possible to select an outgoing message if the
messages, the 2x 7 segment LED display on the base
	answering machine is turned on.
will blink and indicate the amount of new messages. If
	• If the memory is full, only outgoing message 2 can be
the answering machine is switched off, the LED display
	selected (only answering without recording messages).
does not light up. "FL" will be shown on the display when
the internal memory is full and no new messages can be
recorded.