Answering Machine Operation (eco700 Only) 19
Erasing the Outgoing Message
Erase the outgoing message as follows:
•Select the desired outgoing message by pressing and
hold the [ ] key.
•Press the [ ] key to play the outgoing message.
•Keep pressing the [ ] key when the OGM is played back.
Turning Answering Machine On/Off
If the answering machine is on, the 2x7 segment LED display will light up and the machine will automatically pick up the line after a number of rings (see “Setting number of Rings” ).
•Press the [ ] key to switch on the answering machine. The 2x7 segment LED will be turned on.
•Press the [ ] key again to switch off the answering machine. The 2x7 segment LED will be turned off.
Note:
•Even if the answering machine is off, the machine will automatically pick up after 16 rings in order to enable remote activation (see “Remote Operation” ).
Setting number of Rings
The number of rings after which the answering machine will answer calls can be set from 2 – 9 and TS (Toll saver). The standard setting is 3 rings. In Toll saver mode, the machine will answer after 5 rings if there are no new messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine to check your messages remotely (See “Remote Operation”), you can hang up after the 2nd ring. You do not need to pay connection fees and you know that you do not have any new messages.
•Briefly press the [ ] key. The display will show the current numbers of rings.
•Press the [ ] key for 2 secs to set the number of ringing tones.
•Press the [ ] or [ ] key to change the current number of rings.
•Confirm the setting by pressing the [ ] key.
•If you do not press any keys for 3 seconds, the machine will revert back to the answering machine menu, without changing the settings.
•If there is a loss of power in the base, the number of rings will revert to 5.