Clock & Alarm
You can set date and time to be displayed in different formats, and set an alarm time.
Date & Time
Change date format
In Idle:
1.Press <Menu> and <UP/DOWN> to scroll to Clock/Alarm.
2.Press <Select> and <UP/DOWN> to scroll to Date & Time.
3.Press <Select> and <UP/DOWN> to scroll to Date Format.
4.Press <Select> and <UP/DOWN> to scroll to your desired date format of either
5.Press <Select> to confirm.
Change time format
In Idle mode:
1.Follow steps 1 to 2 in Section “Change date format”.
2.Press <Select> and <UP/DOWN> to scroll to Time Format.
3.Press <Select> and <UP/DOWN> to scroll to your desired time format of either 12 Hours or 24 Hours.
4.Press <Select> to confirm.
Set the date In Idle mode:
1. Follow steps 1 to 2 in Section “Change date format”.
Clock & Alarm 21
2.Press <Select> and <UP/DOWN> to scroll to Set Date
3.Press <Select> and enter the date according to the date format you set in Section “Change date format”.
Note
If an invalid data is detected, an error tone will sound and the cursor will stop at the incorrect input.
4. Press <OK> to confirm and save the new date.
Set the time In Idle mode:
1.Follow steps 1 to 2 in Section “Change date format”.
2.Press <Select> and <UP/DOWN> to scroll to Set Time
3.Press <Select> and enter the time according to the time format you set in Section “Change date format”.
Note
If incorrect input is detected, an error tone will be emitted and the cursor will stop at the incorrect input.
4.When the cursor is at the AM/PM field, press <UP/DOWN> to select AM or PM.
Note
Time input is time format dependent. Use 24 hours input if time format is 24 hours.
5. Press <OK> to confirm.
