5.Press <OK> and enter your new 4-digit system PIN.

6.Press <OK> and enter your new 4-digit system PIN again.

Note

If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, “New PIN Invalid” is displayed and you are returned to step 5.

7. Press <OK> to confirm the new PIN.

Reset base settings to default

You can reset your base to its original default settings. After the reset, all your personal settings will be deleted, but your phonebook, call list and redial list entries remain unchanged.

1.Press <Menu> and <UP/DOWN> to scroll to Base Settings.

2.Press <Select> and <UP/DOWN> to scroll to BS Default.

3.Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN: 0000).

4.Press <OK> to confirm the PIN.

5.Press <OK> to confirm the base default reset.

Note

If the PIN code is entered correctly and is confirmed to restore the HS settings to default settings, “Reset” will display. If the PIN code is entered incorrectly, “PIN Invalid” will display.

Full ECO Mode

1.Press <MENU> and <UP/DOWN> to select Base Settings.

2.Press <OK> and <UP/DOWN> to select Full ECO Mode.

3.Press <OK> and <UP/DOWN> to select On or Off.

4.Press <OK> to confirm.

settings 27

Registration

Your handset and base station is pre-registered. Up to six handsets can be registered to a single base station.

If for some reason, the handset is not registered to the base station (<Antenna icon> is off), register your handset according to the following procedure.

1.Press and hold <PAGE> on the base station for about five seconds, the base station is entered into registration mode.

2.Press <Menu> and <UP/DOWN> to scroll to Registration.

3.Press <Select> and <UP/DOWN> to scroll to the base station.

4.Press <Select> and enter the 4-digit system PIN.

5.Press <OK> to confirm the registration attempt.

If the handset registration is successful, you will hear a confirmation tone and the <antenna icon> will stop flashing. The handset will automatically be allocated the next available handset number.

The handset will automatically be allocated the next available handset number.

This handset number is shown in the handset display in standby mode.

Page 29
Image 29
Oricom SLIM-9000 user manual Registration, Reset base settings to default, Full ECO Mode