5.Press <Select> and enter the number for the selected Bar Number.

Note

Each barring number can include up to 4 digits including “*” and “#”. Press <Clear> to delete a digit or press and hold <Clear> to delete the whole barring number.

6. Press <OK> to confirm the number to be barred.

Note

If Barring Mode is set to On and Barring Number is programmed with at least one number, your handset will check the first 4 digits of your dialling number with the programmed barred numbers. If the dialling number matches with any one of the set barred numbers, “Call Barred” will display.

Select base station

If your handset is registered to more than one base station, you can select which base station to use.

1.Press <Menu> and <UP/DOWN> to scroll to HS Settings.

2.Press <Select> and <UP/DOWN> to scroll to Select Base.

3.Press <Select> and <UP/DOWN> to select your desired base station.

Note

An “ * “ is marked at the end of the currently used base.

4. Press <Select> to confirm.

settings 25

Note

If the selected base is found successfully, “Saved” will display, otherwise, “Failed” will display.

Set the SOS number

This function allows you to enter a number which is permitted to be called even when the call barring function is enabled. The maximum length of SOS number is 4 digits.

1.Press <Menu> and <UP/DOWN> to scroll to HS Settings.

2.Press <Select> and <UP/DOWN> to scroll to SOS Number.

3.Press <Select> and you are requested to enter the 4-digit system PIN. (Default 4-digit system PIN is 0000).

4.Enter the system PIN.

5.Press <OK> to confirm the PIN.

Note

If the PIN code is entered correctly, the SOS number will be saved and

Saved” will display. If the PIN code is entered incorrectly, “PIN Invalid” will display .

Reset handset settings to default

You can reset your phone to its original default settings. After reset, all your personal settings will be deleted, but your phonebook, call list and redial list entries remain unchanged.

1.Press <Menu> and <UP/DOWN> to scroll to HS Settings.

2.Press <Select> and <UP/DOWN> to scroll to HS Default.

Page 27
Image 27
Oricom SLIM-9000 user manual Press OK to confirm the number to be barred, Select base station, Set the SOS number