5. Telephone Operation
5.1 Making a call
1.Pick up the handset or press SPEAKER button (the speaker LED will light) and wait for a dial tone.
2.Dial the number you wish to call. The display will show the number that you are dialling. If you dial a number over 14 digits long, it will show the last 14 digits only.
3.When you have completed your call, hang up the handset or press SPEAKER button again to release the telephone line.
It is possible to switch from a handset to speakerphone conversation by pressing the SPEAKER button and picking up or hanging up the handset accordingly.
Pre Dialing a Call
1.Dial the number you wish to call the telephone will speak out the numbers as you dial them (with voice option ON). To correct a number press the DELETE button for each incorrect digit.
2.Pick up the handset or press the SPEAKER button.
5.2 Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes, and the display shows the CALL# and the caller telephone number (with caller id service activated). The phone will say the name of the caller if the number matches a name recorded in the phone book, if not, it will say the numbers of the caller.
This feature allows you to decide to pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1.Pick up the handset or press SPEAKER button to answer the call.
2.At the end of the call, return the handset to the cradle or press SPEAKER button again.
Answering a call telephone call with the remote pendant
If you are within a few meters of the TP150 you can answer an incoming call by pressing the red button on the remote pendant, the telephone will answer the call and activate the speakerphone so you can speak to the caller without picking up the handset. By pressing the red button of the pendant a second time you will deactivate the speakerphone and return to standby mode.
This feature is particularly useful if you are relaxing and do not wish to get up to answer the telephone.
9
