are used, check to make sure that each output is correct from the amplifier.. When using active crossovers on midrange and tweeters, do not use crossover frequen- cies lower than recommended.. If the system is not configured properly, refer to the Internal Crossover Configuration section of this manual and take corrective action..

Step 7 If the output is clear and undistorted, continue to the Adjusting the Sound of the System section of this manual..

Adjusting the Sound of the System

Once you have checked the system's operation, adjust the sound of the system.. Adjusting the sound of the system is accomplished by setting the level controls and adjusting the internal crossovers..

Step 1 Turn the signal source volume control all the way down.. Set any tone controls to their flat or defeated positions.. This includes the loudness control..

Step 2 Turn the level controls of the amplifier to their minimum positions..

Step 3 Choose music with high dynamic content that you like, with which you are famil- iar, and will be used most often in the system..

Step 4 Turn the source unit's volume control up to its highest undistorted output level.. If you lack test equipment, this point occurs between 3/4 to full volume depending on the quality of your source unit.. Listen for any audible distortion.. If any distor- tion is audible, reduce the volume of the source unit until you have an undistorted output.. Leave the volume control at this position during your system tuning..

Step 5 While listening to your chosen dynamic music, turn up the level control corre- sponding to the midrange output until you hear slight distortion and turn the level control back slightly for an undistorted output.. Depending on your system, the midrange and tweeter output may be on the same output channels..

Step 6 Turn up the level control corresponding to the tweeter output until you hear slight distortion and turn back the level control slightly for an undistorted output.. Depending on your system the midrange and tweeter output may be on the same output channels..

Step 7 Fine-tune the output level between midrange and tweeters.. Refer to the Internal

Crossover Configuration section of this manual for detailed instructions..

Step 8 Repeat Steps 5-7 for the rear speakers.. If you do not have rear speakers continue to Step 10..

Step 9 Set levels between the front and rear midrange and tweeters for optimum front/ rear balance..

Step 10 Turn up the level control corresponding to the woofer output until you hear slight distortion and turn back the level control slightly for an undistorted output..

Step 11 Fine-tune the output level between satellite speakers and the woofers.. Refer to the Internal Crossover Configuration section of this manual for detailed instruc- tions..

Step 12 Enjoy your awesome Orion Cobalt sound system..

10

© 2007 directed electronics—all rights reserved

Page 10 Page 12
Page 11
Image 11
Orion Car Audio C0300.2, C0600.2, Amplifier owner manual Adjusting the Sound of the System
Page 10 Page 12

C0600.2, C0300.2, Amplifier specifications

Orion Car Audio has been synonymous with powerful and high-quality sound amplification for years, and their amplifiers C0300.2 and C0600.2 exemplify this legacy. Designed for car audio enthusiasts looking for robust performance and reliability, these models are packed with innovative features that ensure an exceptional listening experience.

The Orion C0300.2 is a compact yet powerful two-channel amplifier that delivers a peak power output of 300 watts. It is engineered with a Class AB topology, combining the efficiency of Class D with the audio fidelity of Class A, making it suitable for a variety of audio systems. Its adjustable gain control allows users to fine-tune the amplifier to match their specific car stereo setup, ensuring that every note is crisp and clear. The C0300.2 also incorporates a built-in crossover system that lets users set the frequency range for each channel, resulting in optimized sound output tailored to the speakers being used.

On the other hand, the C0600.2 amplifier steps things up with a more powerful output, reaching a peak of 600 watts across its two channels. This amplifier is ideal for those who desire a high-impact audio experience, delivering deep bass and pristine highs. Similar to its counterpart, the C0600.2 employs a Class AB design, allowing for high efficiency and better thermal management. This feature ensures that even during extended playback, the amplifier remains cool, preventing overheating and potential damage to the internal components.

Both amplifiers boast a sleek design with a durable chassis, providing not only robust performance but also an aesthetic that fits well within modern car interiors. The integrated short circuit and thermal protection circuits safeguard the amplifier against potential damage, adding to the reliability that Orion is known for.

In addition to their powerful output and efficient designs, both models offer flexibility in installation with multiple mounting options and a user-friendly interface. These features make the C0300.2 and C0600.2 amplifiers perfect choices for anyone looking to enhance their vehicle's audio system, delivering performance that meets the demands of car audio enthusiasts everywhere.

With features designed to maximize sound quality and system compatibility, the Orion Car Audio amplifiers stand as a leading choice for those who appreciate superior audio performance in their vehicles. Whether for daily commuting or enjoying long road trips, these amplifiers elevate the driving experience to a whole new level.
Top Page Image Contents