without signal..
3.RCA Inputs - Accepts RCA input from a source unit, preamplifier, or equalizer..
4.Gain Control - Continuously adjusts from 175mV to 8V input to obtain full power output..
5.HPF, FULL, LPF Switch - Selects either
6.
7.
8.Bass Boost Switch - Adjusts bass gain in three steps (0dB, 6dB, & 12dB)..
9.Status LED - Will indicate any fault condition in amplifier, also lights briefly during muting phase of
Output Plate
CO300..2
1 | 2 | 3 | 4 | 5 |
Figure 3
Figura 3
Abbildung 3
CO600..2
1 | 2 | 2 | 3 | 4 | 5 |
Figure 4
Figura 4
Abbildung 4
1.Speaker Connections - accepts up to 12 AWG speaker wire..
2.1 ATC Fuse (CO300.2) - 2 ATC Fuses (CO600.2) - protects the amplifier from over current situations..
3.Power Connections - accepts up to 4 AWG power cables..
4.REM Remote
5.Ground Connection - accepts up to 4 AWG ground cable..
© 2007 directed