TOOLS OF THE TRADE

Listed next are the majority of the tools required to perform an installation.. Having the proper tools will make the installation that much easier.. Some of these tools are necessities; some will just make the job easier..

Allen Wrenches (2mm, 3mm and 4mm)

DMM or VOM

Electric drill with assorted drill bits

Grommets

Heat shrink tubing

Marking pen

Phillips and flat blade screw drivers

Nylon tie straps

Pliers (standard and needle nose)

Wire crimper

RTA (real time analyzer)

Wire cutters

Soldering iron and solder

Wire strippers

Utility knife

Wire brush or sandpaper for chassis grounding

Reference CD with 1 kHz Sine Wave at 0dB level (all bits high)

End Panel Layouts

Input Plate

CO300..2

1

2

3

4

5

6

7

8

9

Figure 1

Figura 1

Abbildung 1

CO6002

1

2

3

4

5

6

7

8

9

Figure 2

Figura 2

Abbildung 2

1.Power LED - When lit indicates that the amplifier is on..

2.High Level Input - Connect speaker output from factory radio to amplifier, will auto sense signal from radio and turn amplifier on when needed, turn off after 1 minute

© 2007 directed electronics—all rights reserved

3

Page 4
Image 4
Orion Car Audio Amplifier, C0600.2, C0300.2 owner manual Tools of the Trade, End Panel Layouts, Input Plate

C0600.2, C0300.2, Amplifier specifications

Orion Car Audio has been synonymous with powerful and high-quality sound amplification for years, and their amplifiers C0300.2 and C0600.2 exemplify this legacy. Designed for car audio enthusiasts looking for robust performance and reliability, these models are packed with innovative features that ensure an exceptional listening experience.

The Orion C0300.2 is a compact yet powerful two-channel amplifier that delivers a peak power output of 300 watts. It is engineered with a Class AB topology, combining the efficiency of Class D with the audio fidelity of Class A, making it suitable for a variety of audio systems. Its adjustable gain control allows users to fine-tune the amplifier to match their specific car stereo setup, ensuring that every note is crisp and clear. The C0300.2 also incorporates a built-in crossover system that lets users set the frequency range for each channel, resulting in optimized sound output tailored to the speakers being used.

On the other hand, the C0600.2 amplifier steps things up with a more powerful output, reaching a peak of 600 watts across its two channels. This amplifier is ideal for those who desire a high-impact audio experience, delivering deep bass and pristine highs. Similar to its counterpart, the C0600.2 employs a Class AB design, allowing for high efficiency and better thermal management. This feature ensures that even during extended playback, the amplifier remains cool, preventing overheating and potential damage to the internal components.

Both amplifiers boast a sleek design with a durable chassis, providing not only robust performance but also an aesthetic that fits well within modern car interiors. The integrated short circuit and thermal protection circuits safeguard the amplifier against potential damage, adding to the reliability that Orion is known for.

In addition to their powerful output and efficient designs, both models offer flexibility in installation with multiple mounting options and a user-friendly interface. These features make the C0300.2 and C0600.2 amplifiers perfect choices for anyone looking to enhance their vehicle's audio system, delivering performance that meets the demands of car audio enthusiasts everywhere.

With features designed to maximize sound quality and system compatibility, the Orion Car Audio amplifiers stand as a leading choice for those who appreciate superior audio performance in their vehicles. Whether for daily commuting or enjoying long road trips, these amplifiers elevate the driving experience to a whole new level.